Toilet repairs service help with a lot of different things that can cause problems. The first one is the flapper valve that controls the water going into the bowl from the tank, there are many types of valves and it is better to know what suit your toilet.
The next thing on your list would be the ballcock. The ballcock controls the water supply to the amount of water in the tank using a float ball to open and close the supply. When the toilet is running into the overflow tube, the ballcock needs to be replaced.
Other situations that occur with the toilet is the handle for the toilet flushing mechanism is broken the to the handle needs to be replaced.
The Douglas valve is the overflow tube that leads to a plastic seat that flapper valve seats to close the water from draining out of the tank. When the Douglas valve needs to be replaced, the tank needs to be removed from the base. The new Douglas valve will be installed after removing the old and a gasket between the Douglas valve and the tank will be installed.
If water is found on the floor around the toilet, the homeowner should take his hand and wipe underneath the tank and around the supply line to locate the source of the leak. When a toilet is leaking around the base regrouting the toilet is the solution and a wax ring should be installed to make sure this would not happen again.
Toilets can cost from $89.00 to $4000-$89. It’s important that the availability of the parts can be gotten at a nearby plumbing supply house. Most supply houses carry Kohler, American Standard, and Toto. Sometimes the cost of these toilets to repair them cost more than getting a new toilet.
Many people who live in Boca Raton have come from other places in the country to retire. In Boca Raton there is a large majority of the people in the area that are retired, because of the beautiful weather that we have.
When senior citizens get older sometimes having a bathtub is not the best idea. Senior citizens have to get around the best way they can, but things can happen a slip in the fall the bathtub. The best idea is to have a plan before they are unable to get around so well. A lot of people who are seniors and they want to keep the house that they live in usually decide to make it accessible and easier to do daily functions.
Removing the Bathtub and Installing a Shower
The first thing that comes in mind is removing the bathtub and installing a shower. And the shower you can install a chair to set while taking a shower. Also you can install grab bars to maintain your balance. When the homeowner does the conversion it helps a lot to maintain their independence. A local plumbing contractor would be more than glad to give you an estimate on converting the bathtub to the shower.
Bathroom-Shower Remodeling Boca Raton
The old bathtub needs to be removed and the shower drain must be installed. When removing the old bathtub about 10 inches of tile around the tub needs to be removed. The drain in the bathtub must be unscrewed and removed to remove the tub. If the bathtub is made of cast-iron the tub can be removed breaking with a sledgehammer.
The project of removing the tub and installing a shower is about a two day project with a plumber. The tile contractor usually takes another 2 to 3 days to finish the job. When the job is completed, the senior citizen will be able to not worry so much about falling in the top.
Now let’s get back to finishing the project. After removing the old bathtub the area must be cleaned of all the broken tiles and dirt. A curb needs to be constructed with pressure-treated wood so that rotting does not occur. The shower curb is about 4 inches high.
The neoprene shower pan material will be folded in all four corners and overlapped with the curb. Neoprene is a rubberized pan that goes under the shower tiles to protect the water from penetrating into the wall. Then new wonder board, which is the board that tile is placed on when it is installed. Before installing the pan, the shower drain needs to be installed.
The average shower drain is 2 inch but a bathtub drain is inch and a half. The contractor will have to install 2 inch piping so that a trap for the shower can be installed in the floor usually in the center of the shower. After the shower drain is installed the neoprene pan can be installed. It is very important to keep in mind that the shower and should be tested to make sure there are no leaks.
Bathroom-Shower Remodeling -Testing the Shower Pan
The method of testing the shower pan is with a 2 inch test ball to be inserted in the drain for a period of 24 hours before the tile can be installed. A project of this nature needs to be inspected by the Boca Raton plumbing department of the city. The inspector will require the contractor who is overseeing the project to get a permit from Boca Raton city. This is for the protection of our homeowner.
After the shower can have been installed then we raise the bathtub valve to the height for the shower to be usable. When selecting a shower valve that is simple to repair and durable, a plumbing contractor’s favorite choice of valve would be Moen.
For the senior citizens the Moen pos-temp valve would work much easier than to handles. The movement of the valve is much better because of little restriction. Senior citizens with arthritis in her hands would find this to be much easier to handle.
In the process if homeowner would like the plumbing contractor to install a handheld shower, so that the homeowner sits in a chair in the shower it’s much easier to wash with. When the tile contractor installs the tiles on the wall it is important to tell that you would like to have several grab bars around the shower area to support getting in and out of the shower safely.
Most of the time in our houses we have several old faucets that need to be changed. The problem is finding the parts for them could be complicated. Some homeowners think that they can get in their car, go to Lowe’s or Home Depot and find the part right on the shelf. It takes a major research on your side or simply you have an option of hiring an expert.
If you are going to call a plumber to look for those parts and make any kind of plumbing repair, keep in mind that you may get and extra payment depending of the difficulty on finding that special part.
Old Faucet Repair vs New models
When you go to the plumbing supply showrooms, they have very beautiful faucets and sinks but in five years there will not be available parts for the faucet. There is a lot of faucets out there these days, but you want one that has been around a long time. I have been using Moen faucets for years with no complaints, that is just one of the companies that you can buy from. The homeowner nowadays can have some very elaborate bathrooms with very affordable faucets.
So when you are buying these nice beautiful faucets remember, brand name and availability of parts, and when counting on an expert plumber contractor, Call Us:
5 Common Causes of Toilet troubles and How to Prevent Them
A clogged toilet creates a lot of problems in the home. For one, the clogs run the risk of causing overflows and floods. Water damage is often difficult to avoid when a major flood breaks out. If five causes for clogs are present, then avoiding a flood is pretty difficult.
Five Main Reasons for Clogs
There are five major reasons for clogs and homeowners and apartment dwellers should be aware of them. Major clogs are often a result of:
1.) Flushing too much toilet tissue. Tissue does not exactly dissolve when it touches water. So, too much toilet tissue is going to create blockages in the drain. A flood is impossible to avoid when this occurs.
2.) Flushing the wrong kind of tissue down the toilet. Hand towels are very thick and even if you’re only flushing one after having dried off your hands, you may end up causing an overflow. As a rule, do not put hand towels down the toilet at all.
3.) Improperly disposing of things that should be thrown out. Cat litter is not supposed to go down the toilet. It belongs in the trash can. The same is true for the rubber gloves you used to clean up the bathroom. A toilet is not a makeshift substitute for a rubbish bin or garbage disposal. Do not put things down the toilet drain that the plumbing was not designed for.
These helpful tips should help to keep your bathroom running smoothly and efficiently.
• Fit strainers in your showers and tubs to catch soap chips, jewelry, and hair. Empty these strainers regularly.
• Once a week run hot water down your drains to keep it free-flowing.
• Repair leaky faucets as soon as you notice a leak to stop further damage to the faucets and fixtures from occurring.
• Don’t flush cotton balls, q-tips, facial tissue, paper towels, diapers, or make-up pads down the toilet. They will not dissolve and can cause a major clog in the lines.
• To remove mineral deposits on your showerhead, put a cup of white vinegar in a plastic bag and place it over the shower head. Use a twist tie to hold it in place and let it stand overnight. In the morning, take the bag down and use a damp cloth to wipe off the mineral deposits.
Showerhead Maintenance
Over time the holes in your showerhead can get clogged with mineral deposits that cause an uneven spray. In order to clean, follow the steps below:
• Unscrew swivel ball nut – in order to do this you will need channel-type pliers or adjustable wrench. You can wrap the jaws of the tools with masking tape to stop the finishing from getting scratched.
• Unscrew collar nut from the showerhead.
• Clean the inlet and outlet holes of the showerhead gently with a thin wire.
• Flush the showerhead with clean water.
• If your showerhead has built-up mineral deposits you may need to soak it overnight in vinegar. When you’re done, reassemble the showerhead.
Testing Toilets for Leaks
Check your toilets water level in the tank and make sure it’s not overflowing where the overflow pipe is (the pipe in the middle of the tank with a small piece of tubing connecting to it.)
• If you’re seeing water run into the overflow pipe, simply adjust the fill valve until the water stops about one inch below the top of the overflow tube.
• Put a few drops of food coloring into your tank to test the flush valve mechanism.
• Check your bowl after 15-20 minutes. If the water in your toilet bowl has changed colors, you need to replace the ball or flapper because it’s leaking.
